- Meet high standards for performance and safety.
- Feature microprocessor controls, alarm/monitor systems, and rugged cabinet construction.
Compliance: Meet UL, CUL, CE, and TUV standards for safety and perform
Part Number |
Description |
ULT1340-5-A |
13.4 cu. ft.; -10 to -40°C, 115V 60Hz |
ULT1386-5-A |
13.4 cu. ft.; -50 to -86°C; 115V 60Hz |
ULT1386-5-D |
13.4 cu. ft.; -50 to -86°C; 208/230V 60Hz |
ULT1740-5-A |
17.2 cu. ft.; -10 to -40°C, 115V 60Hz |
ULT1740-5-D |
17.2 cu. ft.; -10 to -40°C, 208/230V 60Hz |
ULT2140-5-A |
20.2 cu. ft.; -10 to -40°C, 115V 60Hz |
ULT2540-5-A |
24.4 cu. ft.; -10 to -40°C, 115V 60Hz |
ULT2540-5-D |
24.4 cu. ft.; -10 to -40°C, 208/230V 60Hz |
ULT2586-5-A |
24.4 cu. ft.; -50 to -86°C; 115V 60Hz |
ULT2540-5-V |
24.4 cu. ft.; -10 to -40°C, 220V 50Hz |
 Microprocessor Control
- Setpoint security system with key-operated switch
- Automatic Incident Monitor (AIM)
- Advanced temperature control
- Battery backup
- Extreme ambient alert
Control System
- Microprocessor control system with touchpad data entry and digital display of all functions
- Key-operated switch for main power and alarm
- Independent operating temperature and high/low limit alarm functions with factory-set defaults for quick start-up, all setpoints adjustable in 1°C increments
Electrical System
- On-board power monitoring with digital readout of incoming line voltage
- Optional free-standing surge suppressor minimizes effect of voltage spikes from incoming electrical service
Alarm System
- A.I.M. (Automatic Incident Monitor) identifies any temperature deviation beyond alarm setpoints, with rapid flash for current event, slow flash if event was self-corrected, A.I.M. archives most deviated temperature
- Adjustable safety alarm with automatic continuous charge battery backup provides full alarm function
in case of power failure
- Power failure or temperature deviation triggers audible and visual warning
- Digital battery indicator displays battery capacity; flashing low battery indicator advises when to replace battery
- Touchpad alarm test function physically warms internal probe to simulate alarm condition
- RS-232 data port with system softward package
- Exterior alarm contacts for connection to remote monitoring system
Monitoring System
- Voltage boost indicator advises of low source voltage below safe parameters and indicates
voltage boost system is activated
- Clean filter indicator light advises when to remove and wash condenser filter
Optional inventory components including racks, boxes and dividers can be ordered separately or as full-load
inventory systems. Available accessories include temperature recorders, LN2/CO2 back-up systems, validation testing,
and calibration certificates.
Specifications |
Temperature Range |
-10° to -40°C/-50° to -86°C |
Control |
Microprocessor |
Defrost |
Manual |
Refrigerant |
CFC-free |
Cabinet |
Heavy-gauge, cold-rolled steel with powder-paint finish |
Doors |
One outer, five inner |
Port(s) |
1 in. dia. (2.5cm) access |
|
