Mandel Hopmepage
HomeTo Order
 

General Lab EquipmentBalancesCentrifugesCryogenicsFreezers and RefrigeratorsFume HoodsHomogenizersRadiation SafetyShakers, Stirrers, Vortexes

SonicatorsSterilizersTemperature RegulationWashers and DryersWater and Dry BathsWater PurificationGloves
   

MaxQ™ 6000

Labnet Logo
GyroTwister™ GX-1000 3-D Shaker

Incubated and Refrigerated Stackable Shakers

Product Description:

  • Choose from 2 temperature ranges to fulfill a variety of applications
  • Corrosion-resistant stainless steel chamber accommodates a variety of available 18 x 18” (46 x 46cm) universal and dedicated platforms
  • Large viewing window  and internal light allow sample visibility
  • Units can be stacked two-high on the floor
  • Supplied with two adjustable height perforated stainless steel shelves for added storage
  • Durable powder-coated, cold-rolled steel exterior construction

Digital Operating System:

  • Feature a triple eccentric drive that handles heavy workloads, provides uniform agitation and enables continuous 24-hour operation even at high speeds
  • Precisely monitor and control chamber temperature over complete range with +/- 0.1ºC accuracy at 37ºC with PID temperature controller
  • Solid state DC brushless motor, variable speed control from 15 to 500 rpm, and continuous and timed operation from 0.1 hour up to 999 hours or 0.1 minute to 999 minutes
  • View speed, operating time and temperature simultaneously on three individual LED displays which helps minimize errors in establishing running conditions
  • Visual/audible signals alert you to temperature deviations. Heat turns off if temperature deviates +/- 1ºC of set point
  • Shaker shut down and audible/visual alarms signal if unit operates +/- 10% of set speed
  • User-adjustable speed calibration can be performed using a digital hand held tachometer where verification is required and protocols can be standardized
  • Unbalanced load sensor stops platform motion when excess vibration is detected.  Visual/audible alarm until condition is corrected
  • Soft start feature eliminates splashing of vessel contents
  • Set point retention retains parameters during power failure and restarts unit automatically after power is restored
  • RS232 interface allows remote monitoring of speed, time and temperature
  • Monitor temperature with built-in recorder jack for output (10mv/C) to chart recorders for a permanent record

Safety:

  • Over temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails
  • Safety interlock stops shaking motion when the door is open

 

Description

Cat. No.

Digital incubated shaker, 10ºC above ambient to 80ºC (120V)

BDI-SHKE6000

Digital incubated shaker, 10ºC above ambient to 80ºC (240V)

BDI-SHKE6000-1CE

Digital refrigerated shaker, 15ºC below ambient to 80ºC (120V)

BDI-SHKE6000-7

Digital refrigerated shaker, 15ºC below ambient to 80ºC (240V)

BDI-SHKE6000-8CE

Universal platform – 45.7 x 45.7cm

BDI-30110

 

  Privacy Policy | Comments
Mandel Contact Us Mandel Homepage