Designed to wash inside narrow necked laboratory glassware using injectors and open glassware using rotary spray arms, the LX washers utilize spindle header racks allowing water, detergent and acid to be injected into inverted glassware. The wash pump and hydraulic circuit provide a high flow rate and low-pressure delivery for thorough cleaning without breakage of washed items.
The LANCER 820 LX undercounter glassware washer dryer has professional features including 304 L stainless steel construction, 6 microprocessor controlled programs, HEPA filtered Injector Drying System, and self-diagnostic software for monitoring all aspects of operation. It includes a steam condenser to protect against casework and an insulated chamber for quiet operation. On board storage of cleaning chemicals with built in detergent and acid neutralizer peristaltic pumps provide labor free dosing of cleaning chemicals while the Triple Filter System protects the circulation pump from glass and debris.
The LANCER 820 LX has 2 independent wash levels with racks that are interchangeable between both levels. Racks for the 820 LX are also interchangeable between other LANCER glassware washers including the LANCER 810 LX undercounter glassware washer, the LANCER 815 LX undercounter glassware washer, the LANCER 910 UP freestanding glassware washer and the LANCER 1300 UP freestanding glassware washer. Racks are sold separately.
| External: |
33 ¼” H x 35 ½” W x 26 ¾” D (845 x 900 x 680 mm). |
| Internal: |
20” H x 21” W x 20” D (508 x 535 x 510 mm) |
Effective Wash
Chamber Loading Area: |
- 421 square inches (2,716 square cm) on each of the 2 levels for a total of 842 square inches (5,432 square cm), minimum.
|
| Water Consumption: |
- 3.1 Gallons approximately per fill.
|
| Heat Loss: |
- 3,055 Btu/hr (895 W) maximum.
|
| Sound Level |
|
| |
|
| Utility Requirements: |
|
| Electrically Heated Washer |
- Provide a power cord or hard wire connection and a fusible disconnect switch.
- 208 V, 60 Hz, 1-Phase, 7 kW, 34 A/Phase
- 230 V, 60 Hz, 1-Phase, 7 kW, 31 A/Phase
- 208 V, 60 Hz, 3-Phase, 7 kW, 20 A/Phase
- 230 V, 60 Hz, 3-Phase, 7 kW, 18 A/Phase
|
| Softened Hot Water |
- Provide a shut off valve with a threaded ¾ inch male hose thread nozzle. Flow Rate: 5 ¼ gal/min (20 l/min) with a pressure between 29 to 87 psig (200 to 600 KPa). Maximum Temperature: 50°C (122°F).
- Washer is equipped with a 5 foot (1,524 mm) long, ½ inch (12mm) diameter hose with ¾ inch female hose thread fitting.
|
| Softened Cold Water |
- Provide a shut off valve with a threaded ¾ inch male hose thread nozzle. Flow Rate: 5 ¼ gal/min (20 l/min) with a pressure between 29 to 87 psig (200 to 600 KPa).
- Washer is equipped with a 5 foot (1,524 mm) long, ½ inch (12mm) diameter hose with ¾ inch female hose thread fitting.
|
| Purified Water |
- Provide a shut off valve with a threaded ¾ inch male hose thread nozzle. Flow Rate: 5 ¼ gal/min (20 l/min) with a pressure between 29 to 87 psig (200 to 600 KPa).
- Washer is equipped with a 5 foot (1,524 mm) long, ½ inch (12mm) diameter hose with ¾ inch female hose thread fitting.
|
| Drain Connection |
- Provide a fixed standpipe and plumbing trap with a minimum inside diameter of 1 ½ inches (40 mm). Height above finished floor level between 20 to 27 inches (500 to 700 mm). Flow Rate: 5 gal/min (20 l/min).
- Washer is equipped with a 5 foot (1,524 mm) long, ¾ inch (19 mm)
- diameter hose with gooseneck for connection to standpipe.
|
| Condensate Drain Connection |
- Provide a fixed standpipe and plumbing trap with a minimum inside diameter of 1 ½ inches (40 mm). Height above finished floor level between 20 to 27 inches (500 to 700 mm). Flow Rate: 5 gal/min (20 l/min).
- Washer is equipped with a 5 foot (1,524 mm) long, ¾ inch (19 mm) diameter hose with gooseneck for connection to standpipe.
|
| OPTIONAL FEATURES: Drain Discharge Cool Down |
- Cooling of drain effluent by quench to < 60°C.
|
| Plinth |
- Raises loading level of the 820 LX by 20 inches (500 mm).
- Allows storage of two chemical containers or rack accessories under the chamber.
|
| Door Locks |
- Prevent interference with wash cycle once it is in operation.
|
| |
|
| Available Accessories: |
|
| Customized Baskets |
- Modification of existing racks or design and manufacture of custom racks to thoroughly clean specific items or load configurations.
|
| Starter Kit |
- Versatile accessory with direct injectors (PS/27IXLC) enables washing of a wide variety of glassware in the same batch.
|
| Jet Racks |
- 15 different configurations from 20 to 100 jets.
- Capable of cleaning a wide variety of glassware.
|
| Basic Basket Tray & Basket Tray with Spray Arm |
- Used to clean beakers and other large neck items.
|
| Tall and Short Baskets with Lids |
- Perfect for cleaning test tubes and small parts.
- Adjustable lids and partitions ensure items are held in place during the cleaning process.
|
| Mesh Covers for Jet Racks and Basket Trays |
- Covers used to hold down glassware and prevent smaller items from being dislodged from the jets.
|
| Pipette Rack and Combination Racks |
- LANCER’s combination racks produce excellent cleaning results while maximizing chamber space.
|
