|
Economical water bath series with complete temperature maintenance!
BW-E/ D series has a patented agitating system that provides better temperature stability. A wide range of choices from Analogue or digital control, even mix & match sizes of dual bath models.
Analogue Models:
BW-05B (3.5L) – Cat.No. JTH-AAH46013U
BW-10B (11.5L) – Cat.No. JTH-AAH46023U
BW-20B (20.0L) – Cat.No. JTH-AAH46033U
Digital Models:
BW-05E (3.5L) – Cat.No. JTH-AAH45013U
BW-10E (11.5L) – Cat.No. JTH-AAH45023U
BW-20E (20.0L) – Cat.No. JTH-AAH45033U
Dual-Bath Digital Models:
BW-0505D (3.5 & 3.5L)
– Cat.No. JTH-AAH47013U
BW-0510D (3.5 & 11.5L0
– Cat.No. JTH-AAH47023U
BW-1010D (11.5 & 11.5L)
– Cat.No. JTH-AAH47033U
BW-1020D (11.5 & 20.0L)
– Cat.No. JTH-AAH47043U
Operating features for BW-B (Analogue models):
- 7°C above room temperature to 100°C
- Uniformity ±0.3°C at 50°C (based on various conditions)
- PID temperature control
- Over-temperature limiter, alarm indication
- Analogue dialed indication with fine adjustment°
Operating features for BW-E/ D (Digital models):
- 5°C above room temperature to 100°C
- Uniformity ±0.2°C at 50°C (based on various conditions)
- PID temperature control
- Over-temperature limiter, alarm indication
- Digital LED display readout of temperature and setpoint to 0.1°C
Constructional features:
- Low-profile baths with front slope-panel controls provide easier access and safe operation
- Additional inner circulating system by equipped agitator (BW-E/ D series)
- Dual bath models features individually temperature controller chambers (BW-D series)
- Various accessories gable and flat covers, test tube and spring wire racks, half-shelf adjusters etc. (optional)
* All accessories for dual baths (BW-D series) refer to BW-E/ B series accessories options per each bath size. (Ex. Each of gable covers for BW-1005D are same as one cover for BW-05E/ B and the other cover for BW-10E/ B)
Specifications:
| Model |
BW-05B |
BW-10B |
BW-20B |
| Bath wolume |
3.5L (0.1cu ft) |
11.5L (0.4cu ft) |
20.0L (0.7cu ft) |
| Temperature |
Range 1 |
Amb. +7°C to 100°C (Amb. +9°F to 212°F) |
| Accuracy |
±0.5°C at 50°C (±0.36°F at 122°F) |
| Uniformity |
±0.3°C at 50°C (±0.36°F at 122°F) |
| Heat up time |
50°C(122°F) within 40 min |
| Dimensions |
Bath opening/ |
240×136/ 115mm |
300×240/ 165mm |
498×300/ 165mm |
| depth (W×L/ D) |
(9.4x5.4/ 4.5”) |
(11.8x9.5/ 6.5”) |
(19.6x11.8/ 6.5”) |
| Overall/ |
303×242×245/ |
357×330×290/ |
564×392×290/ |
| with gable cover |
380mm |
425mm |
425mm |
| (WxLxH /H) |
(11.9x9.5x9.6/ 15.0”) |
(14.1x13.0x11.4/ 16.7”) |
(22.2x15.4x11.4/ 16.7”) |
| Net weight |
6.5kg (14.3lb) |
10.0kg (22.0lb) |
18.5kg (40.8lb) |
| Electrical requirements (120V) |
60Hz, 5.8A |
60Hz, 8.3A |
60Hz, 8.3A |
1) The temperature range is measured under a condition of having a lid-off.
| Model |
BW-05E |
BW-10E |
BW-20E |
| Bath wolume |
3.5L (0.1cu ft) |
11.5L (0.4cu ft) |
20.0L (0.7cu ft) |
| Temperature |
Range 1 |
Amb. +5°C to 100°C (Amb. +9°F to 212°F) |
| Accuracy |
±0.2°C at 50°C (±0.36°F at 122°F) |
| Uniformity 2 |
±0.2°C at 50°C (±0.36°F at 122°F) |
| Heat up time |
50°C(122°F) within 40 min |
| Dimensions |
Bath opening |
240×136/ 115mm |
300×240/ 165mm |
498×300/ 165mm |
| / depth (W×L/ D) |
(9.4x5.4/ 4.5”) |
(11.8x9.5/ 6.5”) |
(19.6x11.8/ 6.5”) |
| Overall/ |
303×242×245/ |
357×330×290/ |
564×392×290/ |
| with gable cover |
380mm |
425mm |
425mm |
| (WxLxH/ H) |
(11.9x9.5x9.6/ 15.0”) |
(14.1x13.0x11.4/ 16.7”) |
(22.2x15.4x11.4/ 16.7”) |
| Net weight |
6.5kg (14.3lb) |
10.0kg (22.0lb) |
18.5kg (40.8lb) |
| Electrical requirements (120V) |
60Hz, 5.8A |
60Hz, 8.3A |
60Hz, 8.3A |
1) The temperature range is measured under a condition of having a lid-off.
2) The temperature uniformity value is measured with operating the agitator.
| Model |
BW-0505D |
BW-0510D |
BW-1010D |
BW-1020D |
| Bath volume |
3.5 & 3.5L |
3.5 & 11.5L |
11.5 & 11.5L |
11.5 & 20.0L |
(0.1 & 0.1cu ft) |
(0.1 & 0.4cu ft) |
(0.4 & 0.4cu ft) |
(0.4 & 0.7cu ft) |
| Temperature |
Range 1 |
Amb. +5°C to 100°C (Amb. +9°F to 212°F) |
| Accuracy |
±0.2°C at 50°C (±0.36°F at 122°F) |
| Uniformity 2 |
±0.2°C at 50°C (±0.36°F at 122°F) |
| Cool down time |
50°C(122°F) within 40 min |
| Dimensions |
Bath opening |
240×136/115mm |
240×136/115& |
300×240/165mm |
300×240/165& |
| / depth |
per chamber |
300×240/165mm |
per chamber |
498×300/165mm |
| (W×L/ D) |
(9.4x5.4/4.5”) |
(9.4x5.4/4.5& |
(11.8x9.5/6.5”) |
(11.8x9.5/6.5& |
|
per chamber |
11.8x9.5/6.5”) |
per chamber |
19.6x11.8/6.5”) |
| Overall (W×L×H) |
590×242×245 |
570×332×290 |
580×389×290 |
848×389×290 |
/ 380mm |
/ 425mm |
/ 425mm |
/ 425mm |
(23.2x9.5x9.6/ |
(22.4x13.1x11.4/ |
(22.8x15.3x11.4/ |
(33.4x15.3x11.4/ |
15.0”) |
16.7”) |
16.7”) |
16.7”) |
| Net weight |
11.5kg (25.4lb) |
18.0kg (39.7lb) |
19.5kg (43.0lb) |
25.0kg (55.1lb) |
| Electrical requirements |
5.8 & 5.8A |
5.8 & 8.3A |
8.3 & 8.3A |
8.3 & 8.3A |
| (230V, 60Hz) |
1) The temperature range is measured under a condition of having a lid-off.
2) The temperature uniformity value is measured with operating the agitator.
Accessories and Options:
 Transparent Ploypropylene Gable Type Covers
Prevents liquid losses due to evaporation, protects samples from contamination. Made of transparent polypropylene to allow to observe the samples and gable type roof accommodates glassware of varying height. (Only for BW-E/ B/ D series.)
 Stainless Steel Flat-Type Covers
Made of stainless steel to prevent from occurring corrosion and rust.
(Only for BW-E/ B/ D series.)
 Open-rings Covers
Beakers or Erlenmeyer flasks can be placed directly onto the perforated stainless steel half-shelf adjuster or water tank bottom. Adjustable rings size for each glassware to minimize liquid losses due to evaporation.
(Only for BW-E/ B/ D and BW-G series.)
 Test Tube Racks
Highly durable stainless steel racks with adjustable angle and tube height support.
Do not need any other base plates to use it, simply release and mount racks directly.
 Spring Wire Racks
Ideal for holding a wide variety of tubes, flasks, and other glassware.
All component are made of stainless steel. (For all models.)
 Half-Shelf Adjusters
Stainless steel perforated sample tray shelf with adjustable height support prevents leaks and guard against rust and contamination Putting flat bottom glassware on the shelf without insert.
(Only for BW-E/ B/ D and BW-G series.)
|
