|
Excellent temperature performance heating water baths for general-purpose applications
BW-G series features Microprocessor PID controls to guarantee exceptional temperature uniformity and exclusive timer and programming function for critical research, quality control and regulatory testing!
 BW-05G (5.0L) – Cat.No. JTH-AAH41406U
BW-10G (10.0L) – Cat.No. JTH-AAH41416U
BW-20G (20.0L) – Cat.No. JTH-AAH41426U
Operating Features:
- 5°C above room temperature to 100°C
- Uniformity ±0.2°C at 50°C (based on various conditions)
- Microprocessor PID control/ Auto-tuning/ Calibration
- Digital timer: 1 min to 99 hr 59 min, delayed ON/ OFF
- Over-temperature limiter and low fluid level protection
- 3 different temperature values memorable without auto-tuning
- Digital LED display (0.1°C resolution) with splash-proof keypads
Constructional Features:
- Stainless steel bath allows use with water or other bath fluids, such as silicone fluids
- User-friendly low-profile bath design with easy-to-operate digital controller with 2 display
- Dry-running protection; automated heating element cut-off and audible and visual warning
- Bottom baffle plate screens heater and sensor to protect sample and operators from direct contact
Specifications:
| Model |
BW-05G |
BW-10G |
BW-20G |
| Bath volume |
5.0L (0.2cu ft) |
10.0L (0.4cu ft) |
20.0L (0.7cu ft) |
| Temperature |
Range |
Amb. +5°C to 100°C (Amb. +9°F to 212°F) |
| Accuracy |
±0.1°C at 50°C (±0.18°F at 122°F) |
| Uniformity |
±0.2°C at 50°C (±0.36°F at 122°F) |
| Heat up time |
50°C(122°F) within 40 min |
| Dimensions |
Bath opening/ depth (W×L/ D) |
231×150/ 160mm |
285×211/ 180mm |
345×290/ 200mm |
(9.1x5.9/ 6.3”) |
(11.2x8.3/ 7.1”) |
(13.6x11.4/ 7.9”) |
| Overall (W×L×H) |
355×260×334mm |
410×311×354mm |
471×390×374mm |
(14.0x10.2x13.1”) |
(16.1x12.2x14.0”) |
(18.5x15.4x14.7”) |
| Net weight |
10.0kg (22.0lb) |
14.0kg (31.0lb) |
18.0kg (40.0lb) |
| Electrical requirements (120V) |
50/60Hz, 5.8A |
50/60Hz, 8.3A |
50/60Hz, 8.3A |
Accessories and Options:
 Open-rings Covers
Beakers or Erlenmeyer flasks can be placed directly onto the perforated stainless steel half-shelf adjuster or water tank bottom. Adjustable rings size for each glassware to minimize liquid losses due to evaporation.
(Only for BW-E/ B/ D and BW-G series.)
 Test Tube Racks
Highly durable stainless steel racks with adjustable angle and tube height support.
Do not need any other base plates to use it, simply release and mount racks directly.
 Spring Wire Racks
Ideal for holding a wide variety of tubes, flasks, and other glassware.
All component are made of stainless steel. (For all models.)
 Half-Shelf Adjusters
Stainless steel perforated sample tray shelf with adjustable height support prevents leaks and guard against rust and contamination Putting flat bottom glassware on the shelf without insert.
(Only for BW-E/ B/ D and BW-G series.)
|
