3-way Valve

Three-port, PTFE, 114 µL internal volume, 10 µL dead volume, up to 200 mL/min

Maximum Collection Volume/Tube

1000 mL (Kimax or Pyrex bottles with Code 92 rack)

Maximum Fractions

960 of 13 x 100 mm test tubes with the use of 3 additional expansion units and Code 20-Series racks

Multiple-Cycle Operation

With Trilution™ LC Software: Repetitive collection of each sample into same set of tubes or collection of each sample into different set of tubes

Detector Input

Analog input ±1V range with 30 µV resolution (16-bit resolution)

Operating Modes

Use Trilution™ LC Software (Time, Volume, Peak Slope, Peak Level)

Peak Detection

Adaptive-slope algorithm that applies user-specified parameters to accommodate drifting baselines, negative and asymmetrical peaks, or absolute threshold level that collects all peaks above specified mV value

Peak Parameters

Peak level: in mV with 0.01 mV resolution
Nominal peak width (at half-height): in minutes
Peak slope: in 0 to 90°
Delay setting: in 0.01 minute increments

Programmable Time Units

0.01 to 999.9 minutes

Software Control

Computer control via RS-232 or GSIOC and Trilution™ LC Software

Time-Based Programming

Up to 9 collection windows with independent collection settings for each collection window

Tube Change Time

100-250 msec, center-to-center, depending on rack type

Number of Racks

Holds up to four Code 20-series racks, up to two Code 200-series racks or one Code 90-series rack

Vessel Capacity/Unit (does not reflect expansion units)

Quantity 240 of 13 x 100 mm (10 mL) test tubes
Quantity 192 of 16 x 100 mm tubes
Quantity 176 of 18 x 150 mm test tubes
Quantity 80 of 25 x 200 mm test tubes
Quantity 27 of 28 x 57 mm (25 mL) scintillation vials
Quantity 54 of 30 x 115 (50 mL) conical bottom tubes
Quantity 18 of 48 x 113 mm (125 mL) bottles
Quantity 11 of 500 mL bottles
Quantity 8 of 1 liter bottles

Expansion Units

Up to 3 additional expansion units

Communication Interface

GSIOC; Inputs for start/advance/end/divert; output for control of peripheral devices

Liquid Contact Materials

PTFE and 316 stainless steel

Power Requirements

Frequency: 50/60 Hz
Voltage: 100-240V, main voltage fluctuations not to exceed 10% of the nominal voltage
Current rating: 0.50A for 100-120V or 0.25A for 220-240V

Environmental Conditions

Indoor use
Altitude: up to 2000m
Temperature range: 5° - 40°C,
Air pressure: 75-105 kPa
Pollution degree: 1 or 2, in accordance with IEC66
Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C

Manufacturing Standards

Meets applicable Safety and EMC certification standards; UL and CE certified

Instrument Dimensions (w x d x h)

50.3 x 39.1 x 34.8 cm (19.8 x 15.4 x 13.7 in.)

Instrument Weight

8.6kg (19 lbs)*
*Weight includes the tray platform