Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters from 12 to 17mm.
Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological procedures; and the fully sealed position where the cap is pushed tight to seal the tube for anaerobic use or for storage, transfer and centrifuge applications.
17mm plug type caps (Series T401-10) are also for use with the Simport 15mL centrifuge tube series T408.
Packed in bags of 1000 caps.
Fast Facts
|
Caps and Stoppers |
Diameter: |
Outside dia. 12 to 17mm |
| 2-Position snap caps available |
Plug for 12mm tubes
Cat.# |
Color |
Qty/Cs |
SIM-T401-3N |
Natural |
4000 |
SIM-T401-3B |
Blue |
4000 |
SIM-T401-3G |
Green |
4000 |
SIM-T401-3R |
Red |
4000 |
SIM-T401-3W |
White |
4000 |
SIM-T401-3Y |
Yellow |
4000 |
Flange plug for 13mm tubes
2-Position Snap Caps for 12mm tubes
Cat.# |
For tubes
made of |
Color |
Qty/Bag |
SIM-T401-3DSPE |
Polystyrene |
Natural |
1000 |
SIM-T401-3DSPP |
Polypropylene |
Natural |
1000 |
2-Position Snap Caps for 17mm tubes
SIM-T401-10DSPE |
Polystyrene |
Natural |
1000 |
SIM-T401-10DSPP |
Polypropylene |
Natural |
1000 |
|
