ASPEC™ XL4 Four-Probe SPE System :: Mandel Scientific Company Inc.

SPE 215 System

The SPE 215 System is the optimal solution for high-throughput solid phase extraction and sample purification. It offers versatile application support through 96-well extraction plates and 1- and 3-mL SPE cartridges. Positive-pressure elution—via Gilson's "Integrated Sealing Foot Design"—provides more accurate and precise liquid transfers.

Cat. No. GF-25101322

Features:

Processes up to eight samples every five minutes or 96 samples in an hour; ideal for high-throughput sample cleanup applications
Automates virtually all SPE steps (condition, load, collect, wash, elute and dry down)
An automated solution for sample preparation, sample reconstitution and injection onto HPLC or LC/MS systems
Enables parallel cleanup, filtration and purification of combinatorial libraries and biological fluids
Select large volumes of one to nine solvents or reagents depending upon your application
Performs injection of up to eight samples in parallel with the addition of the optional 889 Multiple Injection Module

Specifications:

Manufacturing Standards

Meets applicable safety and EMC certification standards; UL and CE certified

Arm Speed

X: >45.7 cm/sec (>18 in/sec)
Y: >40.6 cm/sec (>16 in/sec)

Communication Interface

RS-232 or GSIOC; Four inputs (contact closure, TTL or open-collector), four relay outputs and one switched, +24V DC, 1A output

Environmental Conditions

Indoor use
Altitude: up to 2000 m
Temperature range: 5–40°C
Air pressure: 75–105 kPa
Pollution degree: 1 or 2, in accordance with IEC 66
Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C

Front Panel

8-character display, START and emergency STOP soft keys

Horizontal Motion Strength

X: 5 kg (11.1 lbs.)
Y: 7 kg (15.6 lbs.)

Locator Plate Capacity

Up to five combined Code 200-Series Racks and Code 800-Series SPE Racks

Maximum Syringe Flow Rates for Water (with eight syringes installed)

Syringe Size (µL)	Max. Flow Rate (mL/min)
500	2.11
1000	4.22
2500	8.40
5000	12.50

Power Requirements

Frequency: 50–60 Hz
Voltage: 100–120 or 220–240V; mains voltage fluctuations not to exceed ±10% of the nominal voltage
Current rating: 2.5A for 100–120V, or 1.4A for 220–240V

Probe Positioning Performance

Accuracy: ±0.5 mm in X/Y dimensions, ±1 mm in Z dimension
Repeatability: ±0.25 mm in X/Y/Z dimensions

Probe Rinse

Through a dedicated rinse station for rinsing the inside and outside of the probes

Sampler Type

X/Y/Z with stationary rack design

Software

Via Gilson TRILUTION™ Software

Syringe Capacity

500 µL; 1, 2.5 or 5 mL

Syringe Pump

External, integral, high-precision, eight-piston

Vertical Punch Strength

1.4 kg (3.1 lbs.) per probe at the default speed of 16.85 cm/sec

Dimensions (w x d x h)

97.8 x 61 x 64 cm (38.5 x 24 x 25.2 in.)

Weight

45.1 kg (99.5 lbs.)