Description: Bio-Probe Spinner Flask Complete
Bio-Probe Spinner Flask Complete consists of: Flask, and Impeller Assembly.
Flask Specifications:
Material: Type 1 Class A Borosilicate Glass
Dimensions: 136mm OD x 240mm Overall Height
Two 45mm Side arms angled 60° off center
Two 32mm Side arms angled 35° off center
One 100mm Screw Thread Center Neck
Indented bottom
Graduations: 200mL to 1000mL, every 100mL – White Ink (Approx Volumes)
Supply with: Two 45mm PP Blue Screw Caps, two PP Blue Pouring Rings, two 32mm blue screw caps, and two o-rings
Impeller Assembly Specifications:
Impeller Assembly consists of paddle, shaft, O-ring, retaining ring, magnet, magnet holder, adjustable paddle, bearing thimble, bearing spacer, ball bearing, compression spacer, compression washer, sealing ring, cap seal, and screw cap. Adjustable from 220mm-227mm in height.
Paddle: PTFE , 4 1/4”x3”x1/16”
Shaft: 316L Stainless Steel, 8 7/16” long x ¼” OD
O-ring: Silicone, -008
Retaining ring: 316L SST, 0.365” OD x 17/64” ID x 5/32” long
Magnet: PTFE coated, ½” OD x 3” long
Magnet holder: PTFE, ¾” OD x ¼” ID x 4 11/16” long
Adjustable paddle: PTFE, 3 3/8”x 1 ½” with a hub OD of 1 ½”
Bearing thimble: PTFE, 1 ¼” OD by 4/4” ID x 3 1/8” long
Bearing spacer: PTFE, ¾” OD x ½” ID x 0.880” long
Ball bearing: Polybutylene terephthalate & SST, ¾” OD x ¼” ID x 0.281 thick
Compression spacer: PTFE, ¾” OD x ½” ID x 1.645” long
Compression washer: White Silicone, 1 1/16” OD x ½” ID x 1/16” thick
Sealing ring: Red silicone, 3.6” OD x 3” ID x 0.240” thick
Cap seal: PTFE, 3 ¾” OD x 0.985” long
Screw cap: Blue Polypropylene, 4.25” OD x 7/8” long
Bellco Glass, Inc - Biometer Flask Only,250mL . (Each)Regular Price CA$340.00 Special Price CA$289.00