Stackable “Rack-In-Rotor” System
TOMY MDX-310 Centrifuges allow you to stack up to 3 racks, allowing up to 72 1.5/2.0 mL microtubes in one cycle. Do more, save more time. The centrifuge’s ability to quickly and easily accommodate rotors for tubes of just about every size eliminates the need to have an arsenal of centrifuges occupying your lab space. The unique floor-standing design combined with high-capacity and flexibility is like having many centrifuges in one, making more room on your benchtop for research.
Instant Rotor Swap and Identification
Easily and instantly swap rotors for everything from 1.5 / 2.0 mL tubes to 96-well plates to 50 mL tubes. No need to pull out tools or buy several centrifuges to accommodate your large array of tubes and sample media. Plus the Rotor Identification System recognizes the rotor type to set appropriate speed limits.
Faster Sample Processing
The MDX-310 Refrigerated Centrifuge runs at up to 16,000 RPM / 21,130G. The high-power motor and inverter get your centrifuge running at full capacity (up to 16,000 rpm in under 20 seconds). LOTS of power. The chamber can cool down to the set temperature down to -9°C within three minutes, when released from ECO mode. Plus, the centrifuge timer function lets you set the timer from 1-99 minutes. Run the MDX-310 whenever you want and save your time for other business.
Centrifuge With A Small Footprint
The uniquely compact, floor-standing TOMY MDX-310 Centrifuge, measuring 345W x 465D x 860H mm, frees up valuable benchtop space for other equipment and most importantly, saves space for your work.
Easy Loading/Unloading
The rotor/rack system not only takes away the need to load/unload every tube every single time, but it also serves as a handy “rack” making it easy to move your sample to your benchtop or the refrigerator and back to the centrifuge again. The MDX-310 Centrifuges are also set on wheels that allow easy movement and storage of your centrifuge. When not in use, easily move it under a bench or to a comfortable, quiet corner of your laboratory.
Intuitive Operations
The intuitive display and rotating jog dial allow you to easily and intuitively adjust the time, speed and temperature settings.Preset Memory Functions allow programming of 2 preset settings to easily switch back and forth between your favorite settings- quick and easy!
Safety Designed Into the Unit
The lid interlock system electronically locks and prevents the lid from opening while in operation. Smart sensing systems for everything from lid open/close, rotor imbalance, excessive speed, motor over-current (with circuit breaker), and abnormal chamber temperature. To protect your samples, the controls gradually bring down the speed of your centrifuge (45-sec slow deceleration from 500RPM to 0).
Eco-Mode
Controlling the motor fan drive during standby cooling, leads to a reduction in power consumption by up to 43%*, in the grand scheme helping to save you
* Reduction in electricity consumption between the MX-307 and previous generation MX-305. This figure may vary depending on the settings and performance of individual products.
